Using your freezer
Setting the temperature control...
1 Insert a coin in the slot of the Temperature Control to turn it. 2 Turn control to Number 3 This setting is deslgned to maintain the temperature at or near 0°F ( - 17.8�C) under normal operating conditions
Adjusting control...
l l
the temperature
Turn control to higher number for colder temperatures Turn to lower number for less cold temperatures.
Cooling freezer first...
I. Allow freezer to cool 6 to 8 hours before filling with frozen food. 2 Let it cool overnight before adding large amount of unfrozen food. NOTE: When freezer ISfirst started the compressor will run constantly until the cabinet is cooled. It may take up to 6 to 8 hours or longer, depending on room temperature and the number of times the freezer lid IS opened After the cabinet IScooled the compressor will turn on and off as needed to keep freezer at proper temperature. The outside of your freezer may feel worm This IS normal. The freezer�s design and main function is to remove heat from packages and a/r space inside the freezer. Thts heat is transferred to the room air, so the outside walls of the freezer may be worm
The sliding baskets...
Con be moved from side to side or removed loading or unloading food below them. To remove: Lift basket(s) out To replace: Lower basket(s) into place when
The key eject lock...
con help entrapment reduce the hazard of child To lock or unlock the freezer you must hold the key In the lock while turning The lock is spring loaded so the key cannot be left in the lock If the key IS lost, contact your WHIRLPOOL dealer for a replacement Always give the complete model and serial number of your freezer when requesting a replacement key.