Side shelf
SIDE SHELF AND SIDE BURNER ATTACHMENT 1. Loosen the bolts on the side of the grill attach the shelf by allowing the bolt fall through the large opening in the the keyhole slots. Then slide the shelves downward until the bolts are resting the top of the key hole slots. Tighten the shelf bolts. (See Fig. 5) Attach the wires coming out from the the grill to the ignitor terminals. (See Fig. 6) NOTE: It does not matter which wire goes terminal on the four wire ignitor 3. Attach the side burner by allowing the heads to fall through the large opening bottom of the keyhole slots. Then slide side burner downward until the bolts resting against the top of the key hole Tighten all of the side burner bolts. Attach the Flex Line coming from the the grill to the fitting on the bottom of Side Burner. (See Fig. 7) Attach the ignitor wires coming out side of the grill to ignitor terminals. (See Fig. 8)
Fig. 5
2.
Fig. 6
Attach to fitting
Fig. 7
4.
Fig. 8
5.
Ignitor wires hookup
NOTE: It does not matter which wire goes terminal on the four wire ignitor