6 Start button
Press this button for about 2 seconds to start the dryer after having selected the programme. If the door is opened while the programme is running, this button must be pressed again after closing the door in order to restart the programme from the point at which it was interrupted. This button must also be pressed after a power cut. In both cases light or (depending on the phase in progress) flashes to remind you that the start button needs to be pressed again.
This will help you to select the correct programme for drying.
2 Mains ON light
Comes on when the appliance is switched on (ON/OFF button pressed down) and goes out when this button is released.
3 ON/OFF button
This button is used to switch the dryer on. At the end of the programme, release this button by pressing it again to switch the dryer off.
7 Programme phase indicator lights
These lights indicate the various phases of the programme as they are being performed.
4 Low temperature button
Pressing this button allows drying to be performed at a lower temperature, for delicate items. The corresponding pilot light comes on.
�Drying� light
This light indicates that the appliance is in the drying phase.
5 Buzzer OFF button
A buzzer sounds during the anti creasing phase. Press this button when selecting the programme if you wish to switch the buzzer off. The corresponding light illuminates.
�Cooling� light
This light indicates that the appliance is in the cooling phase. At the end of drying, there is a 10 minute cooling phase to cool the laundry. If light or is flashing, this means that the Start button needs to be pressed again for the programme to resume.
�End of programme� light
This light flashes at the end of the cooling phase and during the anti creasing phase.
