Sending Documents via Telephone Line
On-Hook Dialling
For On-Hook Dialling, follow the steps below.
1
Set document(s) face down.
ENTER STATION(S) THEN PRESS START 00%
4
* MONITOR * �
2 3 4
MONITOR
You will hear dial tone through the monitor speaker.
Dial the telephone number from the keypad. Ex: 5 5 5 1 2
5551234�
* DIALLING *
34
When you hear a beep,
ON LINE * XMT *
START
(see Note 1) (see Note 2)
Note:
1. If you need a special access number to get an outside line, dial it first then press PAUSE to enter a pause (represented by a "-") before dialling the full number. Ex: 9 PAUSE 5551234 2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling, press TONE (represented by a "/"). The dialling mode will be changed from Pulse to Tone after dialling the digit "/". Ex: 9 PAUSE TONE 5551234
