Options
Temp Boost Sensor If for any reason the incoming water temperature is below 120°K press the On button to assure the water is heated to proper temperature for best cleaning and diying results. The dial will pause at the -I_ to extend the main wash and the Heating Delay light will turn on. Press the Offbutton Sensor. Heated Rinse to cancel the Temp Boost
To Start
Dishwasher
After loading set the dial to the desired cycle. Press button for desired options. NOTE: Run the water from the hot water tap to clear the line of cold water before starting. Press the door until it latches. The cycle will begin with a drain prior to fill and the On indicator will light. Indicator Lights
and
Dry Options The On light indicates that the dishwasher is operating. The Heating Delay light indicates that the main wash is being extended to heat the water to proper temperature. Adding a Forgotten Item
SANI RINSE Press the Sani Rinse button to turn the heating element on during 'allrinses. The Sani Rinse option helps maintain water temperature and improve drying results, HEAT DRY Press the Heat Dry button to tnrn the heating element on during the fan dry period. This option improves drying resnlts, CANCEL OPTIONS Press the Cancel Options bntton to turn off the heating element during both the rinses and the &y period. During dry the fan will still operate. NOTE: Sani Rinse and Heat Dry can be used separately- or together.
For best cleaning, the forgotten item should be added early in the cycle. 1. Unlatch the door and wait until the sound of circulating water stops. 2. Open the door and add the item. 3. Pause before latehing the door. The cycle will continue at the point it was interrupted.
