SHARP DVSL10X
Manual de Usuario

PLAYING A DISC Track Selection Stereo Sound Mode

MP3
1 Press DIRECT SKIP during playback. � The FILE LIST will appear. 2 Select a desired track using Arrow (L/K/B/s). � Press B when you want to go to the next hierarchy. � Press s when you want to go back to the previous hierarchy. 3 Press PLAY to start playing

CD
between STEREO, L-CH or R-CH.

VCD

1 Press AUDIO repeatedly during playback to select STEREO - both right and left channels are active (stereo) L-CH - only left channel is active R-CH - only right channel is active

NOTES:
� � If the Virtual Surround setting is ON, the sound mode will be fixed to STEREO, and can not be changed. Stereo sound mode will not be changed when playing DTS CD.

NOTES:
� � Press DIRECT SKIP to EXIT. Some selections may take a while to be found.

Random Playback

Subtitle Language

DVD MP3
1 Press MODE twice while playback is stopped. 2 Press PLAY to play the tracks in random order.

DVD-RW
VR mode

The DVD player allows you to select a language for subtitle during DVD disc (if available) playback. 1 Press SUBTITLE during playback. 2 Press SUBTITLE repeatedly to select your desired

Programme

subtitle language.

� The selected language will be displayed on the display bar at the top of the screen.

MP3
This feature allows you to programme a mp3 disc to play in a desired sequence. 1 Press MODE (playback must first be stopped). � The PROGRAM screen will appear. 2 Press K or L to select a track, then press ENTER, � � � �

3 To turn off subtitles, press SUBTITLE repeatedly

until OFF appears. NOTES:
Pressing AUDIO may not work on some DVDs with multiple audio languages (e.g. DVDs which allow audio language setting on the disc menu). Some discs allow audio language setting/subtitle language setting on the disc menu. (Operation varies between discs, so refer to the manual accompanying the disc.) If the desired language is not shown after pressing SUBTITLE several times, the disc does not have subtitles in that language. If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Subtitle language setting. If you choose any other languages, �---� will be displayed instead. (Refer to page 21.)

to save it in a programme.
� Press CLEAR to erase the incorrect input. 3 Press PLAY to start programmed playback.

Audio Language

DVD

DVD-RW
VR mode

The DVD player allows you to select a language during DVD disc (if multi language available) playback. 1 Press AUDIO during playback. 2 Press AUDIO repeatedly to select your desired

Camera Angle

language. NOTES:
� Pressing AUDIO cycles the sound mode through MAIN, SUB, MAIN + SUB. � DVD-RW discs recorded in double sound (two languages ) can be played back in either sound mode of MAIN, SUB or MAIN + SUB. � The sound mode cannot be changed during playback of discs not recorded in double sound.

DVD
Some DVD discs contain scenes which have been shot simultaneously from various angles. You can change the camera angle when the ( ) icon appears on the screen. 1 Press ANGLE during playback. � The selected angle will be displayed on the display bar at the top of the screen. 2 Press ANGLE repeatedly to select your desired

angle.

� 17 �

EN