PIONEER DVR-R100
Manual de Usuario

INSTALLATION
1 Turn OFF the computer's power and remove the power cord from the wall outlet before removing the front panel cover. 2 Remove the blank panel from the front of the 5.25" bay slot. 3 Install the fixing slide rails on the drive. (When slide rails are required, please contact the store where the drive was purchased.) 4 Insert the drive into the slot. 5 When anchoring is required, please refer to the computer's instruction manual. ÷ Please use screws measuring 5mm (3/16 in.) or less for mounting. Using longer screws may damage the drive. ÷ When the mounting screws are loose, the vibrations from a spinning disc may generate ripping noise. To prevent this noise, tighten the screws.

9
En

English