|
|
|
Usuarios conectados
Actualmente hay 6043 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
HOW TO INITIALIZE THE DVD RECORDER
To put the program back at the factory-default, initialize the DVD recorder as the following procedure. 1. Turn the DVD recorder on. 2. Confirm that no disc is loaded or that the disc tray is open. To put the DVD recorder into the Version display mode, press [CM SKIP], [1], [2], and [3] buttons on the remote control in the order. Fig. A appears on the screen.
Model Name :
*******
Firmware Version BE : R1F189000E FE : NRS0051 MST031210 DEFAULT SETTING : ENTER EXIT : RETURN
*1: "*******" differ depending on the models. *2: Firmware Version differ depending on the models, and indication is one example.
Fig. A: Version Display Mode Screen 3. Press [ENTER] button, then the DVD recorder starts initializing. When the initializing is completed, the DVD recorder exits the Version display mode and turns off the power automatically. * To move into the Normal mode from the Version display mode, press [RETURN] button on the remote control instead of [ENTER] button. * When [POWER] button is pressed before [ENTER] button is pressed, the DVD recorder exits the Version display mode, then the power turns off.
1-6-4
E6500DC
|
|
|
> |
|
