Disconnect the two connectors. Remove the four screws. Remove the HDD. Disconnect the three connectors. Remove the four screws. Remove the DRIVE Assy R5. Note: When diagnosing the HDD and the DRIVE Assy R5, use the two Jig cables (Shield ATA cable: GGD1365).
15 �2 12 �2 12 �2 13 16
15 �2
B
11
14
A
MAIN ASSY
E
POWER SUPPLY ASSY
C
HDD
DRIVE Assy R5
17 18 19 20 21
Remove the four screws. Remove the front stay. Remove the seven screws. Release cables from the three cord holders. Remove the sub chassis.
�4
