Installation of [3] and [6]
First, insert [6] diagonally in [3] as shown below. Then, install [6] in [3] while pushing (L-1) in the direction of the arrow. After installing [6] in [3], confirm that pin A of [3] enters hole A of [6] properly. [3]
Fig. DM3H
Pin D Pin C [2] A 1 Slide 2 Pull up
View for A
1
(L-1)
2
[6]
Hole A Pin A
Installation of [4] and [6]
Install [6] in [4] while pulling (L-2) in the direction of the arrow. After installing [6] in [4], confirm that pin B of [4] enters hole B of [6] properly. [4]
Pin A
Pin B Slot A
View for B
Hole B Pin B
(L-2)
[6]
Slots B
Fig. DM5H
Slot A First, while pushing the locking tab as shown in the right, slide and pull up the right side on [2] to release Pin A and Pin B from the slots A. Then, remove Pin C and Pin D on [2] from the slots B as shown. Locking tab View for A
