PHILIPS DVP620VR/75
Manual de Usuario

H9723AD(EN).qx3

04.6.25

3:28 PM

Page 8

Setting Up your DVD/ VCR
Automatic Channel Setup
You can programme the tuner to scan only the channels that you can receive in your area. � Use the remote control for this procedure. Turn on the TV and select the TV channel to the video channel on the TV. Press VCR, then MENU. Press K/L to select �INITIAL�, then press B. Press K/L to select �CH TUNING�, then press B. CH TUNING Press K/L to select �AUTO�, then B AUTO press B. MANUAL � The tuner scans and memorises all the active channels in your area. After scanning, the tuner stops on the lowest memorised channel.

To Skip a Preset Channel
The channels you can no longer receive or seldom watch can be set to be skipped when you access channels SKIP 3/CH K or SKIP /CH L. � Use the remote control for this procedure. Press VCR, then MENU. Press K/L to select �INITIAL�, then press B. Press K/L to select �CH TUNING�, then press B. Press K/L to select �MANUAL�, then press B. Press K/L to select �SKIP�, then press B. MANUAL Use numerical key pads or K/L to POSITION P08 select relevant position number, PPPPPPPPPPPPPPPP then press B. BAND [UHF] B SKIP [OFF] Press K/L to select �SKIP�, then press B to select �ON�. � To memorise the channel again, press B. �ON� will change to �OFF�. Press MENU to exit. Note: � To confirm that a channel has been deleted, press SKIP 3/CH K or SKIP /CH L.

1 2 3 4 5

1 2 3 4 5 6 7

To Select a Desired Channel You can select a desired channel by using the SKIP 3/CH K or SKIP /CH L, or directly pressing the numerical key pads on the remote control. � Enter a channel numbers as a two-digit number for the quickest results. For example, to select channel 6, press 0 and 6. If you only press 6, channel 6 will be selected after a brief delay. � You can only select channels 1-99.

8

Setting the clock
If the display shows an incorrect time or � --:-- �, the time and date must be reset manually. � This DVD/VCR incorporates a 24-hour clock.The clock must be set for the Automatic Timer Recording function to operate correctly. Press VCR, then MENU. Press K/L to select �INITIAL�, then press B. Press K/L to select �CLOCK�, then press B. PressK/L until the relevant year appears, then press B. CLOCK Likewise, set the relevant month, B YEAR 2004 day, hour, and minute. MONTH 01 Press MENU to start the clock. DAY 0 7 WE HOUR __ Notes: MINUTE __ � In the steps 4 and 5, you can go back to the item you want to correct by pressing s . � Although seconds are not displayed, they begin counting from 00 when you exit by pressing MENU. Use this feature to synchronise the clock with the correct time. � When unplugging the power-cord or if there is a power failure for more than 1 minute, you may have to reset the clock.

Manual Channel Setup
1 2 3 4 5 � Use the remote control for this procedure. Press VCR, then MENU. Press K/L to select �INITIAL�, then press B. Press K/L to select �CH TUNING�, then press B. Press K/L to select �MANUAL�, then press B. Press K/L to select �POSITION�, then press B. MANUAL � When a weak signal is received in B POSITION P08 Manual Tuning mode, you can PPPPPPPPPPPPPPPP change the background to solid BAND [UHF] blue or the static screen by SKIP [OFF] 1 2 3 4 5 6

pressing CLEAR/C.RESET. 6 Use numerical key pads or K/L to select your desired position number, then press B. � You can select position number 01-99. � If �ON� appears on the right side of �SKIP�, press K/L to point to �SKIP�. Then press B to select �OFF�. � Press K/L to select �BAND�, then press B. 7 Press K/L to select �PPPPPPPPPP�, then press s / B to start scanning. � The DVD/VCR tuner will begin to search up or down automatically.When a channel is found, the DVD/VCR will stop searching and the picture will appear on the TV Screen.
Tuner channel VHF L: 45.75~138.25MHz

Picture Select
This function enables you to select the picture quality of a tape. � Use the remote control for this procedure. 1 Press VCR, then MENU. 2 Press K/L to select �SET UP�, then MENU press B. 3 Press K/L to select �PICTURE�, TIMER then press B. B SET UP
INITIAL

VHF H: 140.25~423.25MHz UHF: 427.25~855.25MHz

8 Press MENU to exit. Note: � To confirm that a channel has been added, press SKIP 3/CH K or SKIP /CH L.

4 Press B until the desired mode (NORMAL, SOFT, or SHARP) is indicated on the TV screen. Notes: � If the On screen menu still remains, press MENU to exit the menu. � Once you select the Picture

SET UP AUTO REPEAT [ON] B PICTURE [NORMAL]

Select mode, it stays in effect even after you turn off the DVD/VCR. � When you use this function during playback, you can select a mode (NORMAL, SOFT or SHARP) as you watch video image.

8