DVD Setup Menu Options
Digital Output Set the Digital output according to your optional audio equipment connection. LPCM Output If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust �LPCM Output�. Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality.
Language Digital Output LPCM Output Night Mode
Video PCM 48Khz On
Audio
Rating PCM All Off
Language Digital Output LPCM Output Night Mode
Video PCM 48Khz On
Audio
Rating
1 In �AUDIO SETUP�, press OK to enter
the submenu.
48Khz 96Khz
2 Press 3 4 to highlight {DIGITAL
OUTPUT}, then press OK.
3 Press 3 4 to highlight one of the options
below: OFF Turn off the digital output. ALL If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/ receiver. PCM Only if your receiver is not capable of decoding multi-channel audio.
1 In �AUDIO SETUP�, press OK to enter
the submenu.
2 Press 3 4 to highlight {LPCM Output},
then press OK.
3 Press 3 4 to highlight one of the options
below: 48kHz Playback a disc recorded at the sampling rate of 48kHz. 96kHz Playback a disc recorded at the sampling rate of 96kHz that can only be achieved in Stereo-Classic mode.
E n g l i s h
4 Select an item and press OK.
Helpful Hint: � If DIGITAL OUTPUT is set to �All�, all audio settings except MUTE are invalid.
4 Select an item and press OK.
Helpful Hint: � LPCM Output can be selected only when PCM is activated.
TIPS:
To return to the previous menu, press OK. To remove the menu, press SYSTEM MENU.
