No hay comentarios de productos.
Advanced Setup Menu (Settings for Commercial Use)
06
To set power ON/OFF twice or more on the same weekday
Date change with ON and OFF times
With the following settings, power turns on at 23:00 on Monday night, and turns OFF at 2:00 AM on Tuesday morning.
By changing the weekday setting, it is possible to cycle the power ON/OFF multiple times in a single day. With the [ON] time input flashing, press the | button to make the weekday flash. Then use the », « buttons to change the weekday setting. When the following kind of setting is made, the power turns ON at 7:30 on Sunday, playback starts from chapter 1 of title 1, and then power turns OFF at 12:00. Then at 13:00 power turns ON again, and chapter 1 of next title 2 is played, after which the power turns OFF at 17:30. Using this kind of procedure, it is possible to set up to 24 ON/ OFF times in a single weekday.
Setting the same ON/OFF times everyday
Setting the weekday to [ALL] results in the same ON/OFF times being allocated for every day of the week. In the case shown below, the power is set to turn ON each day at 7:30, play chapter 1 of title 1, then turn off at 17:30.
In addition, given the above settings, if you wish for the power to remain off only on Sunday, set the Sunday [OFF] time to the same time as the [ON] time set under [ALL]. In this case, do not set any value in the Sunday [ON] time. As an example, with the following settings, the power remains OFF on Sundays, while on other weekdays it turns ON at 7:30 and playback starts from chapter 1 of title 1, then power turns OFF at 17:30.
51
Advanced Setup Menu (Settings for Commercial Use) 06 English
|