JBL DVD600
Manual de Servicio

DVD600
This button is also used during the �Auto Search� procedure when programming the remote. u All Off: Simultaneously sends Power Off commands to all programmed devices controlled by the remote. v All On: Simultaneously sends Power On commands to all programmed devices controlled by the remote. w Volume Down: Use to lower the system volume. x Channel/Title/Guide: Starts the process of setting the DCR600�s speaker output levels using an input source rather than the test tone. Press this button, then use the � / ¤ Buttons y to select the channel being adjusted, followed by the Set Button . You may then use the � / ¤ Buttons y again to change the level for that channel. Press the Set Button to lock in the setting. When using the DVD600 to play a DVD disc, this button functions as a Title button, and displays the disc�s Title Select Menu, or a symbol ( ) if the disc either does not offer this function or has only one title. When the Video 3 input has been programmed for a cable or satellite service, this button will access the service�s programming guide, if the service is active. y � : Used to change or scroll through items in the on-screen menus, or to change configuration settings, such as output levels. When changing an item such as the surround mode or digital input directly, first press the function or mode to be changed, such as Surround Mode or Digital Input, and then press this button to scroll through the list of available choices. z Menu: Used only with video sources. When DVD is selected, pressing this button while a DVD disc is playing stops playback and displays the disc�s menu. When the unit is stopped, pressing this button displays the DVD600�s Setup Menu. ` �: Used to change the menu selection or setting during some of the setup or other procedures. Set: Used to enter settings into the memory of the DCR600, DVD600 or video device selected. Also used in the setup procedures for delay time, speaker configuration and channel output level adjustment. When the DVD600 has been selected, pressing this button will select the item that is highlighted in the Status Banner, or in the on-screen menu displayed by a DVD disc. Used to change the menu selection or setting during some of the setup or other procedures. Digital/Subtitle/Exit: When the DCR600 is selected, press this button to assign one of the digital inputs to a source. When the DVD600 is selected, this button is used to change the subtitle choice. For other video devices, it exits the menu. Used to change or scroll through items in the on-screen menus, or to change configuration settings, such as output levels. When changing an item such as the surround mode or digital input directly, first press the function or mode to be changed, such as Surround Mode or Digital Input, and then press this button to scroll through the list of available choices. Delay/Return/Prev Ch.: Begins the process for setting the delay times used by the DCR600 when processing surround sound. After pressing this button, the delay times are entered by pressing the Set Button and then using the � / ¤ Buttons y to change the setting. Press the Set Button again to complete the process. This button is also used when viewing a menu display from a DVD disc. Press it to return to the previous menu screen. � , Numeric Keys: These buttons serve as a ten-button numeric keypad to enter tuner preset positions. They are also used with the DVD600 to enter data for sequential programming, to enter or change the access password for parental control, to enter a language code, or to respond to menu options presented by a disc. When the TV or another video device is selected, they are used to select channel numbers. They may also be used to select track numbers when playing a CD, DVD or LD. Tuner Mode/Angle: Press this button when the tuner is in use to select between automatic tuning and manual tuning. When the button is pressed so that the AUTO indicator V goes out, pressing the Tuning Buttons 49 8 will move the frequency up or down in single-step increments. When the FM band is in use, pressing this button when a station�s signal is weak will change to monaural reception.
¤:

�:

When a DVD encoded with multiple-angle information is playing, press to change the angle in use. Note that this function is only available on discs that are specially prepared to take advantage of the multiple-angle function, and only for those parts of the disc that are recorded with multiple-angle content. The DVD600 will display a camera icon on the screen to indicate when this feature is available. Memory: Enters a radio station into the DCR600�s preset memory. Once the MEMORY Indicator S flashes, you have five seconds to enter a preset memory location using the Numeric Keys � , . Repeat the process to enter additional stations. 49 Tuning Up/Down/Step (Frame Advance) Buttons: When the tuner is in use, these buttons will tune up or down through the selected frequency band. If the Tuner Mode Button @ has been pressed so that the AUTO Indicator V is illuminated, pressing and holding either of the buttons for three seconds will cause the tuner to seek the next station with acceptable signal strength for quality reception. When the AUTO Indicator V is NOT illuminated, pressing these buttons will tune stations in single-step increments. When a DVD disc is playing, press these buttons to move forward or backward one frame at a time. Press the Play Button 58 10D to resume normal play. These buttons do not function when a CD is playing. 46 Direct/Program Button: Pressing this button in tuner mode starts the sequence for direct entry of a station�s frequency or CD track. After pressing the button, simply press the proper Numeric Keys � , to select a station or track. When the DVD600 is stopped, press this button to display the program menu and enter a programmed play sequence. When a disc is playing, press to switch between normal play and programmed playback. 47 Clear Button: Erases incorrect entries when using the remote to directly enter a radio station�s frequency. When the DVD600 has been selected, press this button to remove the Status Banner or other displays from your video screen. This button is also used to clear items from Programmed Play lists.

12