Connect with TV 1.Normal Connection
Connect the player and the appropriate port of TV set with video/audio wire, as indicated in the right picture:
2.Connect with S-video Terminal
Connect one end of the S-video wire with S-video output socket on DVD back-panel and another with the S-video input socket of the TV, and then connect audio wire with the TV.
3.Connect with YUV (Y Pb/Cb Pr/Cr) Terminal
Connect the Y, Pb/Cb, Pr/Cr jacks on the disc player and the corresponding jacks on the TV with audio cord. After that, connect disc player to TV with audio cord. For a Progressive Scanning TV set, press the PS key on the remote control after DVD has read the disc. Then, the DVD player will shift to the progressive output mode and there may be no picture on the TV screen. You can recover the picture by shifting the video mode of the TV set to the progressive scanning one.
