PIONEER DV-676A-S/RLFXJ
Manual de Usuario

Initial Settings menu

07

Chapter 7

Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and video output settings, parental lock settings, and display settings, among others. If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting. 1 Press HOME MENU and select �Initial Settings�.
Initial Settings

Note � In the table below, the default setting is shown in bold: other settings are shown in italics. � The Digital Audio Out settings only need to be set if you have connected the digital output of this player to an AV receiver, or other equipment. � Check the operating instructions supplied with your other equipment to see which digital audio formats it�s compatible with. � Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often these settings can also be made from the DVD disc menu.

2 Use the cursor buttons and ENTER to select the setting and option you want to set. All the settings and options are explained on the following pages.

Digital Audio Out settings
Setting Digital Out Option On What it means
Digital audio is output from the digital outputs. Note that there is no digital output when playing SACDs and some DVD-Audio discs regardless of this setting. No digital audio output. Dolby Digital encoded digital audio is output when playing a Dolby Digital DVD disc. Dolby Digital audio is converted to PCM audio before being output. DTS encoded digital audio is output when playing a DTS disc. (Noise will be output if your amplifier/receiver is not compatible with DTS audio.) DTS audio is converted to PCM audio before being output.

Off Dolby Digital Out Dolby Digital Dolby Digital > PCM DTS Out DTS

DTS > PCM

35
En