PIONEER DV-646A/WYXJ
Manual de Servicio

DV-646A
Disassembly of the Traverse Mechanism Assy and the Pickup Assy 1 2 3 4 5 6
Remove the Bonnet and Tray Panel. Remove the Front Panel. Remove the Loading Mechanism Assy (Screws �4). Remove the Bridge (Screw �1). Pull out the Tray and remove it while unhooking a Hook. Turn the Short SW to Short side.

7 8

Remove the DVDM Assy (Screws �2). Remove a screw.

Cautions:
Screw is locked with Silicone adhesive. Please lock it with Silicone adhesive when installs it.

9

Remove the FFC Holder with the state which Flexible Cable was atatched. FFC Holder

5

-1 Bridge Hook

8

Silicone Adhesive GEM1037

4

-1

Traverse Mechanism Assy

9

4

-2

5

-2

RearView

Bottom View

Pickup Assy

6
Short SW

When Removing The Traverse Mechanism Assy

Caution in the tray insertion
In the Tray insertion, insert it after matching a triangle mark of the Loading Base and a position of pin of the Drive Cam. Triangle mark Loading Base

10 11 12

Remove the Pickup Flexible Cable Unhook ( �4) Remove the Traverse Mechanism Assy

Traverse Mechanism Assy

Short

Open

11 � 2

12

10

11 � 2

Traverse Mechanism Assy

Pin

Drive Cam

Exchange
77