TEAC DV-3800
Manual de Usuario

6. Press the ZOOM button for the sixth time. The TV screen displays:

Headphones Enjoying
DVD SVCD VCD

CD

MP3

ZOOM

CURSOR

SELECT

1. If you want to use headphones to enjoy all by yourself, adjust the master volume to the minimum firstly, then insert the headphones plug into the headphones jack of this player and adjust the master volume until suitable.
phone

The frame is minified for the third time. 7. Press the ZOOM button again, the frame restores normal size. 8. When the fame is magnified, Press the CURSOR buttons to move the frame. You can enjoy any desired part of the frame.

NOTE
The audio output mode must not be in 5.1CH.

Progressive/Interlacing Output Mode
You can adjust this player's video output mode according to TV settings.
P SCAN I SCAN

NOTE
1. When buttons are invalid, the TV screen displays:

Pleaes input the valid mode again.

1. Press the I-SCAN button. Press I-SCAN to switch the video to the interlacing scan output mode. 2. Press the P-SCAN button. Press P-SCAN to switch the video to the Y Pb Pr mode.

NOTES
Please change your TV settings accordingly and connect the cords according to the instructions in pages 7&8. When there are no audio and video outputs if you switched on this player or pressed the above two buttons and theVFD works normally, please check whether this player's progressive-scan or interlacingscan mode corresponds to that of the TV set. To help you to recognize more clearly in which output mode this player is, character appears on the VFD when opening the disc tray or reading a disc. I indicates the interlacing-scan mode, while P indicates the progressive-scan mode. This player's interlacing-scan mode does not support the old-style 100Hz color TV set.

20