Inicio >>
PIONEER >>
DV-270-S/RDXJ/RB Manual de Usuario
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
Initial Settings menu
07
Parental Lock
� Default level: Off; Default password: none; Default Country code: us (2119) To give you some control over what your children watch on your DVD player, some DVDVideo discs feature a Parental Lock level. If your player is set to a lower level than the disc, the disc won�t play. Some discs also support the Country Code feature. The player does not play certain scenes on these discs, depending on the Country Code you set. Note � Not all discs use Parental Lock, and will play without requiring the password first. � If you forget your password, you�ll need to reset the player to register a new password. (see Resetting the player on page 36)
1
Select �Password Change�.
2 Use the number buttons to enter your existing password, then press ENTER. 3 Enter a new password and press ENTER. This registers the new password and you will return to the Options menu screen.
Setting/changing the Parental Lock
1 Select �Level Change�. 2 Use number buttons to enter your password, then press ENTER. 3 Select a new level and press ENTER. � Press (cursor left) repeatedly to lock more levels (more discs will require the password); press (cursor right) to unlock levels. You can�t lock level 1. This sets the new level and you will return to the Options menu screen.
Registering a new password
You must register a password before you can change the Parental Lock level or enter a Country code. 1 Select �Password�.
Setting/changing the Country code
You can find the Country code list on page 38. 1 Select �Country Code�.
2 Use the number buttons to enter a 4digit password. The numbers you enter show up as asterisks (*) on-screen. 3 Press ENTER to register the password. You will return to the Options menu screen.
2 Use number buttons to enter your password, then press ENTER. 3 Select a Country code and press ENTER. There are two ways you can do this: � Select by code letter: Use / (cursor up/ down) to change the Country code. � Select by code number: Press (cursor right) then use the number buttons to enter the 4-digit Country code. The new Country code is set and you will return to the Options menu screen. Note that the new Country code doesn�t take effect until the next disc is loaded (or the current disc is reloaded).
Changing your password
To change your password, confirm your existing password then enter a new one.
