MARANTZ DV-12S2
Manual de Servicio

Disassembly of the Traverse Mechanism Assy and the Pickup Assy 1 2 3 4 5 6
Remove the Bonnet and Tray Panel. Remove the Front Panel. Remove the Loading Mechanism Assy (Screws �4). Remove the Bridge (Screw �2). Pull out the Tray and remove it while unhooking a Hook. Turn the Short SW to Short side.

7 8 9

Remove the DVDM Assy (Screws �2). Remove four screws. Remove the Mechanism Holder.

8

�4

Mechanism Holder

5

-1 Bridge Hook

4

�2 -1

9

4

-2

5

-2 Bottom View

10 Remove a screw.
RearView

Cautions:
Screw is locked with Silicone adhesive. Please lock it with Silicone adhesive when installs it.

11
Short Open

Remove the FFC Holder with the state which Flexible Cable was atatched. FFC Holder

6
Short SW

10

Silicone Adhesive GEM1037

Traverse Mechanism Assy

11
Caution in the tray insertion
In the Tray insertion, insert it after matching a triangle mark of the Loading Base and a position of pin of the Drive Cam. Triangle mark Loading Base

Bottom View

Pin

Drive Cam

3-25