Selecting an option
The AIR DRY Option
Air in the dishwasher is automatically heated during the �dry� part of all cycles except RINSE & HOLD. If the AIR DRY Option is selected, air in the dishwasher is not heated. Using the AIR DRY Option helps save energy, but dishes take longer to dry [overnight) and some water spotting may result. Some items [such as plastics) may need towel drying.
ENERGY SAVING AIR DRY
HI-TEMP WASHING Option
When the HI-TEMP WASHING Option is selected, water for the main wash and the final rinse is heated to 145°F (63°C) -except in CHINA CRYSTAL and RINSE & HOLD Cycles. Washing and rinsing action in those parts of the cycle will be longer if the water is heated. The WATER HEATING HOLD Signal Light will be on to show that the cycle is delayed while water is heating.
HI-TEMP WASHING
The RESETOPTIONS Button
If you want to change a selected Button. Re-select an option, if desired. option, push the RESET OPTIONS
RESET OPTIONS
Using DELAY WASH
Use the DELAY WASH Control when you want DELAY the selected cycle to start later-from % to 8 hours after loading the dishwasher. For examWASH ple, use DELAY WASH to run during off-peak hours of electrical use. 1. Close and latch the door. 2. Turn the DELAY WASH Control until the number of hours� delay you want shows in the window. (The control can be moved up or down to change the setting.) 3. To set less than 1 hour, turn to 1 hour and then back to the desired time. 4. Push Cycle Selector Button and, if desired, Option Selector Button or Buttons. 5. The DELAY Signal Light will be on until the washer starts. The number in the window will show about how much time is left before the cycle starts. You can add items while the DELAY Signal Light is on. Be sure you latch the door. The timer will not continue unless the door is latched. You can also change the time while the timer is counting down.