1. Spin the Upper Spray Arm to make sure nothing will stop it from turning freely
3. Run hot water at sink nearest washer until it is hot. Turn it off.
dish-
Clean Selector Buttons
Option
Selector
Buttons
Starting
your dishwasher
NORMAL WASH Cycle...
1. Turn Cycle Control Knob clockwise until It stops at dot marked NORMAL WASH. 2. Push NORMAL WASH button. 3. Push button for option desired. 4. Wlthout turning It, pull out the Cycle Control Knob to start the cycle.
POTS & PANS Cycle...
1. Make sure Cycle Control Knob points to dot marked HEAVY WASH, POTS % PANS. 2. Push POTS % PANS Clean Selector Button. 3. Push button for option desired. 4. Without turning it, pull out the Cycle Control Knob to start the cycle.
RINSE 6 HOLD Cycle...
1. 2. 3. 4. 5. Select AIR DRY Option only. Push NORMAL WASH Button. Unlatch door and open slightly. Pull Cycle Control Knob out. Turn Control Knob Clockwise to dot marked RINSE % HOLD. 6. Close and latch the door to start the cycle.
night] and some water spotting may result. Some items (such as plastics] may need towel drying.
HEAVY WASH Cycle..
.
1. Make sure Cycle Control Knob points to dot marked HEAVY WASH. 2. Push HEAVY WASH button. 3. Push button for option desired. 4. Wlthout turning it, pull out the Cycle Control Knob to start the cycle.
HEAT DRY or AIR DRY?
If the HEAT DRY Option is selected, air in the dishwasher is heated during the �dry� part of the cycle. If the AIR DRY Option is selected, air in the dishwasher is not heated. Using this option helps save energy, but dishes take longer to dry (over-
To add a dish after starting
1. To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed NORMAL WASH. 2. Unlatch the doorto stop the cycle, but don�t open it until the spray arms stop spinning. 3. Open the door and add the dish.
4. Close the door. Do not latch It. Wait 30 seconds for air in the dishwasher to warm up. This helps reduce the amount of moisture that can come from the vent when restarting the cycle. 5. Latch the door. The dishwasher will start from where it stopped.