DTR-6.6 FW UPGRADE
DSP/Video FW Upgrade 0. Unzip �firmware.zip� and store the unzipped folder & files and "Update.exe" as below. If you get the message like below, FW files are not properly stored. Check the path.
\Updater_SR803\Update.exe \firmware\SR803\fdist.fdf \FW803.dcf \DSP7803_05Y28A.s28 \05X04B_video803.hex You can name the uppermost folder "\Updater_SR803" as you like. 1. Hold down "Display" and then press "Standby" button to show Main version. 2. Press "Setup" within 3 seconds. 3. Press "Enter" while DSP version is shown to enter Setup mode. "DSP F/W Update" will be shown. 4. Connect your unit and PC with Flashwriter Jig and put the unit into Standby mode. 5. Double-click "Update.exe". Flashwriter Jig 0JFLASHEX
6. Click "DSP Updade" . DSP
PC (Personal computer)
0JFLASH
FFC
P702
RS232C
NAAR-8661
7. Update completes when Front Display stops showing the progress. Note: Even if you try to check the DSP version, you might not be able to get is due to the wrong combination of DSP and Main. In this case, check the version after upgrading Main FW.
Main FW Upgrade Write the latest main program using FlashSta.exe.