Problem English
You cannot select all of the channels and the P+/- or Arrow up/down buttons do not always work. You cannot access a particular channel, even using the number buttons.
Possible cause
Some channels have been selected as favourites and the favourites mode is on. The parental lock has been activated on this channel and an OSD message prompts you for your PIN code.
Action
Use the <FAV> button to select another Favourite list. Use the All TV Channel list to see all available TV channels. Enter your parental code to access the channel or unlock the channel. See paragraph 5.7 for more details. When prompted for your PIN code, enter the Master PIN code.This will allow you to proceed as well as reset the PIN code to the default PIN code of the receiver (default is 1234). The Master PIN Code is 0112. Note: Keep this code secret to prevent your children from using it.
You have forgotten your PIN code.
You set a timer but it did not record what you wanted.
The recorder was not set correctly.
Make sure that your recorder is set for the same time as your digital receiver. Alternatively use one of the Easy Record options to control automatically your recorder (see paragraph 7.2) Tune your receiver to the desired channel, and then select Installation/Test reception to display the signal quality and strength for this channel. Check power connections. Enter you PIN code when setting the timer. Refer to this section to change the order again. Refer to paragraph 5.2.3.1 and modify the �Video Output� setting to RGB. Check if the TV SCART socket of the TV is RGB capable. If not refer to the user manual of your TV to change the SCART connection to your TV. Check the receiver �Screen format� option setting, following the information in paragraph 5.2.3.1. If you have a widescreen TV, you may also need to check your TV settings. Reset your receiver by pressing the Standby button on the front of the receiver for more than 4 seconds.
You set a timer, but recording failed.
Loss of input signal
Loss of power Locked channel The order of the channels has changed. They have been re-arranged as described in paragraph 5.3.1.1. If you have connected using SCART and you have an RGB-capable TV, one of the receiver settings could be wrong. You have connected the receiver TV SCART to a SCART socket of your TV set which is not RGB capable.
The on-screen displays are not as sharp as expected.
The picture on some channels seems to have been stretched or squashed.
The broadcast is probably in widescreen and the receiver settings may not be correct.
The picture (programme or menu) is frozen and/or you cannot operate your receiver.
