More about recording (VCR or DVD control)
Connection for Easy recording
9.1
This connection allows automatic recording without requiring you to programme your VCR or DVD recorder. Prior to choosing this connection method: - Consult the user manual of your VCR or DVD recorder to check if and how this feature is supported. Most Philips VCR and DVD recorders support one of the two Easy-recording options. - Check that your TV and VCR or DVD both have two SCART sockets. - Incorporate your receiver in your existing installation as shown below:
- Plug your aerial lead plug into the "AERIAL IN" socket of your digital receiver. - Connect the "RF OUT" socket of your digital receiver to the "Aerial input" socket of your VCR or DVD using the RF coaxial lead supplied with your digital receiver. - Connect the "RF OUT" socket of your VCR or DVD to the "Aerial input" socket of your TV using a RF coaxial lead. - Connect the "TV" SCART socket of your digital receiver to the "EXT1" SCART socket of your TV using the SCART lead supplied with your digital receiver. - Connect the "VCR" SCART socket of your digital receiver to the "EXT2" SCART socket of your VCR (called "IN") using a SCART lead. - Connect the "EXT1" SCART socket of your VCR (called "OUT") to the "EXT2" SCART socket of your TV using a SCART lead. - Plug all your equipment, excluding your digital receiver, into the mains. - Switch on your TV and select a channel. - Plug your receiver into the mains.The "WELCOME" screen is displayed (the left-hand LED will be illuminated green). - Read the Quick installation chapter to proceed with the channel scan of your digital receiver if not already done. 32 MORE ABOUT RECORDING
