1.MAINTENANCE INSTRUCTIONS
For service information on the deck mechanism see separate publication<DTH6000 SERIES MECHANICAL ADJUSTMENTS>.
1.1 Resetting the video recorder
a) Disconnect the video recorder from the mains supply. b) Hold down the <+> and <-> keys on the front panel and reconnect the video recorder to the mains supply. Release the <+> and <-> keys. c) Resetting the video recorder also can be done in the service mode.
1.2 Service mode adjustments
Accessing the service mode a) Press <menu> key on the remote control, then the summary menu is displayed on screen. b) Sequential pressing the numbers as <3> ,<6>, and <9> will display the 5 items of service mode. c) Each service mode can be accessed by pressing the digit key corresponding to the number on the left side. <0> key on the remote control will release the service mode.
1.3 Head switching point
a) Insert a protected test cassette into the video recorder. The VCR will automatically enter the play mode. b) Next enter the service mode as described above. c) Press <5> key on the remote control, then the video control data is displayed. d) Press <Rec> key either on remote control or on the front panel. <0> key on the remote control will release the video control data mode.
Don�t reset in the Service mode. In case of reset, regional code will be changed, from 2 to 1