4-5. S-CORRECTION ADJUSTMENT 1) Pattern : PAL B/G Crosshatch 2) Press the key to set the "STANDARD" mode. 3) Choose the "SC" using the � UP� � DOWN�keys. PR , PR 4) Adjust each distance of horizontal line to be the same using the � VOLUME UP� � , VOLUME DOWN�keys. 4-6. HORIZONTAL CENTER ADJUSTMENT 1) Pattern : PAL B/G Monoscope 2) Press the key to set the "STANDARD" mode. 3) Choose the "HSH" using the � UP� � DOWN�keys. PR , PR 4) Adjust the vertical line of picture to coincide with the mechanical center marks of the CRT using the � VOLUME UP� � , VOLUME DOWN�keys. 4-7. WIDTH ADJUSTMENT 1) Pattern : PAL B/G Monoscope 2) Press the key to set the "STANDARD" mode. 3) Choose the "EW" using the � UP� � DOWN�keys. PR , PR 4) Set each side over scan to be 10% using the � VOLUME UP� � , VOLUME DOWN�keys. 4-8. PINCUSHION ADJUSTMENT 1) Pattern : PAL B/G Crosshatch 2) Press the key to set the "STANDARD" mode. 3) Choose the "PW" using the � UP� � DOWN�keys. PR , PR Adjust parabola width to fit on screen. 4) Choose the "CP" using the � UP� � DOWN�keys. PR , PR Adjust coner parabola to fit on screen. 5) Choose the "TC" using the � UP� � DOWN�keys. PR , PR Adjust trapezium to fit on screen.
