Inicio >>
DAEWOO >>
DTD29D3ME/MT Manual de Servicio
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
Alignment Instruction
7-7. The adjustment of Vertical Linearity
7-7-1. Receive PAL CROSSHATCH pattern(signal of company:PAL-B 5CH). 7-7-2. Fix adjustment of Vertical Linearity after EEPROM presetting, but it can be adjusted in case of need. 7-7-3. Press the PR up/down Keys ( / ) to select V LINEAR. Adjust Vertical Linearity with Vol Up/Down ( / ) keys.
7-8. The adjustment of VERTICAL S-Correction
7-8-1. Receive PAL CROSSHATCH pattern(signal of company:PAL-B 5CH). 7-8-2. Fix adjustment of Vertical S-Correction after EEPROM DATA presetting, but it can be adjusted in case of need. 7-8-3. Press the PR up/down Keys ( / ) to select S CORRECT. Adjust S-Corrction with Vol Up/Down ( / ) keys.
8. THE ADJUSTMENT OF SUB-PICTURE (SUB-BRIGHT, SUB-CONTRAST)
8-1. Receive PAL RETMA PATTERN(signal of company:2CH., PAL-B) 8-2. Press the [S9] KEY of SVC Remocon, SUB PICTURE-Adjustment OSD wil be displayed. 8-3. The adjustment of SUB-BRIGHT
8-3-1. Press the PR up/down Keys ( / ) to select SUB-BRIGHT in SUB-PICTURE MENU. Adjust SUB-BRIGHT with Vol Up/Down ( / ) keys. 8-3-2. Adjust With BRM(Default Value=127) When SUB-BRIGHT is lacking in margin of adjustment. 8-3-3. Standard of adjustment : Adjust till instant of 1, 2th cordon disappear in RETMA CONTRAST CHART(signal of company). 8-3-4. When Sub-Picture mode was exited after SUB�s adjustment, Normal vlaue is brighter(about 18%) than adjustment-point(about 10%) of adjustment-mode because BRIGHT is set to rise 2~3 step.
