DTC-9.8 FIRMWARE UPDATE -1
How to Check Versions of Main, DSP(1st to 3rd), HDMI, Video and Network FW
1. Press and hold down [DISPLAY] button, then press [STANDBY/ON] button when the unit is powered on. The main microprocessor version will be displayed on Front Display for about 3 seconds. <e.g.>
Ma in: 8 7 1.03/07903A
2. Press [Tone +] button while the version is displayed. Then, �DSP 1st SR8051/07601A� will be displayed. Press [Tone +] button again while �DSP 1st SR8051/07601A� is displayed. Then, �DSP 2nd: SR8052/07518A� will be displayed. In this way, as [Tone +] button is pressed while a version is displayed, the next information will be displayed. If [Tone -] button is pressed, the order will be reversed.
M ai n: 87 1.03/07903A
DSP 1st: SR8051:07601A
[Tone -]
DSP 2nd: SR8052:07518A
[Tone +]
DSP 3r d: SR8053:07820B
HDMI: 1.01/07706A
Attetion: Video FW cannot be reloaded. Board replacement is necessary for newer version.
Vi deo: 07606EI0924 Net: 1.00/07602A
Note: These versions are the latest as of October 1, 2007.
