DAEWOO DTC25G1VM (NO TXT
Manual de Servicio

SAFETY INSTRUCTIONS
NOTE
BEFO R E SERVIC IN G TH IS C H ASSIS, READ TH E �X-R AY R ADIATIO N PREC AUTIO N �, �SAFETY PR ECAU TION � AND �PRO D UC T SAFETY N O TICE� BELO W.

X-RAY RADIATION PRECAUTION
1. Excessive high voltage can produce potentially hazardous X -R AY R A DIATIO N .To avoid such hazards, the high voltage m ust not exceed the specified lim it. The nominal value of the high voltage of this receiver is 26.5kv(25�), 29.5kv(29�) at max beam current. The high voltage must not, under any circumstances, exceed 29.0kv (25�), 31.5kv(29�). Each tim e a receiver requires servicing, the high voltage should be checked. It is recom m ended the reading of the high voltage recorded as a part of the service records. it is im portant to use an accurate and reliable high voltage m eter. 2. The only source of X-R AY R adiation in this TV receiver is the picture tube. For continuous R AD IATIO N protection, the replacem ent tube m ust be exactly the sam e type tube as specified in the parts list.

SAFETY PRECAUTION
1. P otentials of high voltage are present w hen this receiver is operating. O peration of the receiver outside the cabinet or w ith the back cover rem oved involves a shock hazard from the receiver. 1) S ervicing should not be attem pted by anyone w ho is not thoroughly fam iliar w ith the precautions necessary w hen w orking on highvoltage equipm ent. 2) A lw ays discharge the picture tube to avoid the shock hazard before rem oving the anode cap. 3) D ischarge the high potential of the picture tube before handling the tube. The picture tube is highly evac uated and if broken, glass fragm ents w ill be violently expelled. 2. If any Fuse in this TV receiver is blow n, replace it w ith the FU S E specified in the R eplacem ent P arts List. 3. W hen replacing a high w attage resistor(oxide m etal film resistor) in circuit board, keep the resistor 10m m aw ay from circuit board. 4. K eep w ires aw ay from high voltage or high tem perature com ponents. 5. This receiver m ust operate betw een A C 110~250volts, 50H z/60H z. N E V E R connect to D C supply or any other pow er or frequency.

PRODUCT SAFETY NOTICE
M any electrical and m echanical parts in this chassis have special safety-related characteristics. These characteristics are often passed unnoticed by a visual inspection and the X-R AY R AD IATIO N protection afforded by them cannot necessarily be obtained by using replacem ent com ponents rated for higher voltage, w attage, etc. R eplacem ent parts w hich have these special safety characteristics are identified in this m anual and its supplem ents, electrical com ponents having such features are identified by designated sym bol on the parts list. Before replacing any of these com ponents, read the parts list in this m anual carefully. The use of substitute replacem ent parts w hich do not have the sam e safety characteristics as specified in the parts list m ay created X-R AY R adiation.