SETTING FW
NOTE:This work does before TEST MODE Prepared Special remote controller (RC-484M) 1. Setting firmware Function :DVD position 1-1.Turn on power switch and display "No Disc" on the FL tube. 1-2. Press "DVD"key and "2"key at the same time. 1-3. Press "CLEAR" key. Display "REGION MODE" on the FL tube.
1
2. How to FWrewite 2-1. The following FW file and file with about 40M (WAVW or MP3 etc) are written. 2-2. Write it Disc at Once. 2-3. DISC that has already been written is put on tray and close the tray. 2-4. Disc is loaded, display is "Firmware Upgrade Erase and program start cancel" on theTV monitor. 2-5. Select "Start" and press "ENTER" key. Starting upload. 2-6. When the tray opens, DISC is taken out. NOTE: Do not pull out the AC cord. Initialize it after changing of writing.
