|
|
|
Usuarios conectados
Actualmente hay 6012 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
1. SERVICE NOTE
1-3. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.) Note 1: When replacing the SY-143 board, erase the data in internal memory of the board before replacement. Note 2: When replacing the SY-143 board or the IC202 on the SY-143 board, execute formatting and initialize the internal memory after replacement.
Method for Copying the Data in Internal Memory
Copy
Copies all images in the internal memory to a �Memory Stick Duo�.
OK Cancel
See the following procedure. Cancels the copying.
1 Insert a �Memory Stick Duo� having 32 MB or larger capacity. 2 Select [OK] with v on the control button, then press z. The message �All data in internal memory will be copied Ready?� appears. 3 Select [OK] with v, then press z. Copying starts.
Copying 102_COPY
� Use a fully charged battery pack or the AC Adaptor (not supplied). If you attempt to copy image files using a battery pack with little remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data. � You cannot copy individual images. � The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the �Memory Stick Duo� after copying, then execute the [Format] command in (Internal Memory Tool). � You cannot select a folder copied on a �Memory Stick Duo�. � Even if you copy data, a (Print order) mark is not copied.
Method for Formatting the Internal Memory
This item does not appear when a �Memory Stick Duo� is inserted in the camera. The default settings are marked with .
Format
Formats the internal memory.
� Note that formatting irrevocably erases all data in the internal memory, including even protected images.
OK Cancel
See the following procedure. Cancels the formatting.
1 Select [OK] with v on the control button, then press z. The message �All data in internal memory will be erased Ready?� appears. 2 Select [OK] with v, then press z. The format is complete.
DSC-W30/W40_L3 1-2
|
|
|
> |
|
