|
No hay comentarios de productos.
Still image editing
Protecting images
� Protect
To prevent accidental erasure of an important image, you can protect it.
On the single screen
a Set the mode dial to .
On the Index screen
a Set the mode dial to , press (index) to switch to the Index screen. b Press MENU.
The menu appears.
b Display the image you want to protect with b/B. c Press MENU.
MENU Control button
The menu appears.
d Select - (Protect) with b/B, then press z.
Mode dial
c Select - (Protect) with b/B, then press z. d Select [Select] with b/B, then press z. e Select the image you want to protect with v/V/b/B, then press z.
The image currently being displayed is now protected, and the - (Protect) mark is indicated on the screen.
VGA
101
2/9
Protect Exit
BACK/NEXT
The green - (Protect) mark is indicated on the selected image.
� Note that formatting the �Memory Stick� erases all the data in the �Memory Stick� even if images are protected, and these images cannot be recovered. � It may take some time to protect the images.
e To protect other images, display the image you want to protect with b/B, then press z.
SELECT
MENU
TO NEXT
To cancel the protection
In Step 4 or 5, press z again. The mark disappears.
f To protect other images, repeat Step 5. g Press MENU.
68
|
