1
, Open the Battery cover.
Slide it in the direction of the arrow, and it opens out.
2
, Insert the batteries.
Match the +/� poles of the batteries to the +/ � marks inside the battery case.
� Occasionally clean the poles of the batteries and the terminals of the Battery cover by wiping them with a dry cloth. If the poles of the batteries or the terminals become covered with a film of dirt or oil from the skin, the operating time of the camera can be greatly reduced.
3
, Close the Battery cover.
Close the Battery cover while holding the batteries in. The cover is closed when it clicks. To remove the batteries Stand the camera on end, open the Battery cover upward, then remove the batteries.
� Make sure you don�t drop the batteries when opening or closing the Battery cover.
