SONY DSC-D700
Manual de Servicio

10

�CAM �PLAY
MENU

�OFF

10

Turning the power/mode dial to OFF turns the power off.

Locking the Focus
When you focus the picture by pressing the release button halfway, the focus is set at that distance until you release the button. This is called Focus Lock. If you want to take a picture of a subject on the edge of the picture composition, engaging Focus Lock allows you to move the camera and then take the picture.

Note
If you do not operate the camera for about one minute when the camera is on in the CAM mode, the LCD monitor automatically shuts off (Standby Mode). Also, if the camera is not touched for approximately four minutes after that, the camera automatically shuts completely off.

EXCUTE

EXIT

1
1~3
EV
B AE
SIZE

Center the subject in the viewfinder and press the release button halfway. The focus is fixed.

Taking a Picture

Auto Focus
This camera employs an auto focus mechanism. When auto focus is turned on, the camera automatically focuses on the picture subject. Auto focus is turned on by setting the focus mode switch to AF. Centering the AF frame on the subject and pressing the release button halfway focuses the picture frame. When the picture is in focus, the AF focusing mark in the LCD monitor and viewfinder changes as follows. Check the mark before making the exposure, and if the picture is not in focus, let go of the release button and press it halfway again to refocus.

� On the LCD monitor
When the release button is pressed halfway, the AF focusing mark flashes green. When the picture is focused, the indicator lights a steady green. If the picture cannot be focused, the indicator lights a steady red.

� In the viewfinder
When the release button is pressed halfway, the AF focusing mark flashes.
2000 5.6

When the picture is focused, the indicator lights steadily.
2000 5.6

When the picture cannot be focused, the indicator continues flashing.
2000 5.6

36 GB

QDRIVE UA L W

Taking a Picture
1-19 DSC-D700 (UC,CE)

USE

R

ISO

AE-LOCK R-REVIEW

2

Move the camera to frame the composition you want.

3

Press the release button down completely.

Note AE-LOCK
When you press the release button halfway to set the focus, the exposure value is also set. This is indicated by the AE-LOCK indicator in the viewfinder and by highlighted display of the exposure value and shutter speed on the LCD monitor. Also, if you frame a subject that you'd like to manually set the exposure for and press the AELOCK button, the exposure for that subject is fixed. Use this function when it is necessary to change the picture composition after deciding the exposure. This is effective for picture taking under such conditions as where there is backlight. To cancel AE-Lock, press the AE-LOCK button again, or press any other operation button.

37 GB