Adjustment Procedure 1) Receive NTSC Cross Hatch signal. 2) The Screen mode should be selected on Full mode. 3) When the vertical lines of the left and right side is not straight but distorted in the S type, adjust Side Pin S to correct the unbalanced vertical lines.
Side Pin S
Trapezoid
1) Receive NTSC Cross Hatch signal. 2) The Screen mode should be selected on Full mode. 3) When the screen shape is not rectangular but trapezoid, adjust Trapezoid to correct the unbalanced shape.
Side Pin Balance
1) Receive NTSC Cross signal. 2) The Screen mode should be selected on Full mode. 3) When both the left and right screen shape is not symmetrical but on one side, adjust Side Pin Balance to correct the unbalanced shape.
H Duty
1) There is no need to adjust. 2) Check if the value of data is "31".
Parallelogram
1) Receive NTSC Cross Hatch signal. 2) The Screen mode should be selected on Full mode. 3) When both the left and right screen shape is on one side, adjust Parallelogram to correct the unbalanced shape.
400Vp-p
H Focus Phase
1) There is no need to adjust, and check if the value of data is "32". 2) Check that the focus on the right and left side is clear.