Inicio >>
PIONEER >>
DRM-UF701/ZUCKFP Manual de Usuario
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
INSTALLATION-RELATED PRECAUTION
Before installing the unit, read and follow the following instructions. ¶ This unit can be installed on only one changer. ¶ This unit occupies two of the rear bays. The rear bays where this unit can be installed are the odd-numbered rear bays. ¶ It is impossible to install another unit in 1 or more of this unit�s rear bays (odd numbered). Attempting to install another unit will cause a malfunction, so do not attempt to do so.
INSTALLATION
For instructions on how to open the access doors, see the operating instructions for the changer. 1. When inserting a unit, be sure to place the unit on the changer guide rails and push the unit in until the lock lever on the unit shifts to the locked position. Maybe you can hear a clicking sound then. 2. Connect the changer interface cable.
Changer interface cable
Guide rails
Disc flip unit
NOTE: Connect the changer interface cable to the connector corresponding to the bay in which the units have been installed. (Note that labels are affixed to connectors indicating the corresponding bay number.) Note that it is extremely important to do this, as connecting the changer interface cable to a neighboring bay will result in damage to discs and the disc transport mechanism.
Warning about static electricity
Lock lever
When a unit is to be removed from the changer, flip the lock lever to the released position and then pull the unit out from the changer.
Always be sure never to touch the contacts or ports when operating units. Also be sure to touch a metallic surface on the changer before installing additional units to the changer.
