JVC DR-DX5SEU
Manual de Usuario

62

EN

EDITING
� Slide the TV/CABLE/SAT/DVD switch to DVD.

Edit To Or From Another Recorder
You can use your unit as the source player or as the recording deck. NOTES: � When using another recorder as the recording deck, refer to its instruction manual. � It is not possible to dub copy-protected contents. An error message will appear on the TV screen. A When using your unit as the source player
TV Player Your unit

1

Connect another recorder�s 21-pin SCART connector to the unit�s 21-pin SCART connector as illustrated.

A When using your unit as the source player: ^ connect its [L-1 IN/OUT] connector to the recording deck. B When using your unit as the recording deck: ^ connect its [L-2 IN/DECODER] connector to the source player. If another recorder is compatible with the Y/C signal: � ^ when using your unit as the source player, set AL-1 OUTPUTB to ASCART S-VIDEOB. (A pg. 63) ^ when using your unit as the recording deck, set AL-2 SELECTB to AS-VIDEOB. (A pg. 63)

2 3 4 5 6 7

When using this unit as the recording deck, press DV/HDD/ DVD SELECT on the unit repeatedly to select the recording deck.

When using this unit as the recording deck, press PR +/� to select AL-2B. � Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 63) When using this unit as the recording deck, press REC MODE repeatedly to set the recording mode. For DV deck, press REC MODE on the remote control to set the recording mode. Engage the Play mode of the source player. Engage the Record mode of the recording deck. Stop recording on the recording deck, then stop playback on the source player.

21-pin SCART cable (supplied) 21-pin SCART cable (not supplied)

Another recorder Recorder

B When using your unit as the recording deck
TV Recorder Your unit

NOTES: � All necessary cables can be obtained from your dealer. � For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal. � When you use this unit as the source player for editing, be sure to set ASUPERIMPOSEB to AOFFB before starting. (A pg. 73) If you are using another recorder with S-Video and Audio output connectors, connect its S-Video and Audio output connectors to this unit�s [S-VIDEO] and [AUDIO] input connectors on the front panel. Then, set the unit�s input mode to AF-1B in step 3, and set AF-1 INPUTB to AS-VIDEOB. (A pg. 64)

21-pin SCART cable (supplied) 21-pin SCART cable (not supplied)

Another recorder Player