P GM 0 1 D 5 T NO. 25
÷ Perform only step 1 to simply check the program. ÷ In the case of a CD-TEXT disc, the track�s title is scrolled on the display. ÷ Each time the key is pressed, the program No. and the track No. on CD are displayed.
Example �
2 Select the disk.
DISC SKIP REPEAT
Press until the track No. to be changed is displayed.
Disc Skip
ENTER
3 Select the new track No. 123
+10
456
1 2 3 4 5 6 7 8 9 0
÷ Press it while the �PGM 01� indicator blinks. ÷ The track being played cannot be changed.
789 0 +10
ENTER
4 Set the entry.
P.MODE
P.mode
ENTER
To add a track to the program
RC operation
DISC SKIP
GRC operation
1 Select the disk.
Disc Skip
REPEAT
ENTER
2 Select the desired track No. 123
+10 1 2 3 4 5
456 789 0 +10
ENTER
6
7
8
9
0
÷ When a track No. is selected, the track will be added to the end of the existing program.
3 Press the P.MODE key.
To clear tracks from the program
RC operation
GRC operation
Remote control unit only
Press to clear tracks from the end.
CLEAR
Clear
ENTER
÷ Each time the key is pressed, the last track in the program is cleared. ÷ The tracks which are programmed earlier than the track being played cannot be cleared.
To clear all track.
P.MODE
P.mode
ENTER
÷ Selected tracks can be also completely cleared just by operating the 0 key. ÷ The entire program is cleared.
Auto space function
During programming of tracks, a non-recorded space of a few seconds will be automatically created between tracks. By recording tracks with these spaces on tape, the search and repeat play operations of tape using the DPSS function (which works by searching the non-recorded spaces) can be performed reliably. ÷ Even when the performances of two tracks are continuous (which occurs with classical or live recording music), the spaces will be created if they have different track Nos.
