Release the 7 hooks to separate the LCD panel cover from the top cover. Separate the LCD panel cover with the LCD panel. Disconnect the LCD cable and earth lead wire. Release the 5 hooks (A) from the printer chassis. Release the 2 hooks (B) from the printer chassis using a small flat-blade screwdriver as shown in the Fig-1. Separate the top cover from the chassis. Disconnect the sensor cable from the top cover.
(2) (3) (4) (5)
(6) (7)
(8) (9)
Remove the 6 screws and LCD panel. Remove the 2 switch buttons and operation key.
