|
No hay comentarios de productos.
(S-10)
[10] Plate Holder
(S-11)
[11] Main PCB Holder
Fig. D8
3. How to Eject Manually
1. Turn the unit over. 2. Insert the shaft less than a diameter of 3 mm (e.g. screwdriver) straightly into the opening as shown. 3. Turn the shaft along with the opening clockwise. 4. Repeat steps 2 and 3 until the tray will open. 5. Pull the tray slowly manually
View for B Rear
Turn the shaft along with the opening clockwise. Shaft (e.g. screwdriver) Opening
B Front
1-5-4
E6E71DC
|
