BOSCH DOOR HINGE REVELSAL KIT
Manual de Usuario

9) Use a small flat head screwdriver to pry the top hinge hole cover from the dryer�s left side. Lift the top hinge hole cover slightly, and remove it as shown in Figure 13.

11) Take the supplied bottom hinge hole cover, position it on the dryer�s right side as shown in Figure 15, and press it into place.

Figure 15 Figure 13

NOTE: Considerable pressure is required to insert the spacer nuts. 13) Take the two supplied spacer nuts, position them on the dryer�s left side as shown in Figure 17, and press them into place.

Figure 17

12) Take the supplied latch retainer, positon it on the dryer�s right side as shown in Figure 16, and press it into position.

Figure 16

10) Take the supplied top hinge hole cover, position it on the dryer�s right side as shown in Figure 14, and press it into place.

14) Take the supplied left-side version hinge and position it on the dryer�s left side as shown in Figure 18. Make certain that the two holes on the hinge line up with the two spacer nut holes.

Figure 14

Figure 18

3