|
Usuarios conectados
Actualmente hay 5686 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
6-6. SS-63 Board Replacement
6-6-2. Error Logging Data Clear and Calendar/Clock Setting
Clear the another error logging data in NV-RAM on the SS-63 board that is installed, and set the calendar/clock to the correct day and time. Clear and set the data as follows after entering the error logger display mode. (1) Enter the error logger display mode. (Enter the maintenance mode, then enter M2 : ERROR LOGGER.) n Contents of the error logger are superimposed on the video monitor connected to the VIDEO OUTPUT COMPOSITE 3 connector. Error logging data clear [step (2)] (2) Push the RESET button once on the lower control panel while pressing the STOP button. Calendar/Clock setting [steps (3) through (8)] (3) Push the SET button once on the lower control panel while pressing the STOP button. n After pushing the SET button once, displays the setting menu on lower half part of the superimposed screen, and cursor (* mark) moves to the setting menu. (4) Turn the search dial to FORWARD direction (2) until the value for year on last line (calendar and clock) blinks. n The * mark is not displayed on the line of the calendar and clock. (5) Blink the value of changing (setting) item (year, month, day, hour, minute, or second) by turning the search dial. (6) Change its item to a desired value by turning the search dial while pressing the JOG button on the lower control panel. m . Change the value, then displays message �Push SET button�. And stops a step forward of the calendar/clock. . If canceling that setting (return to previous value), don�t push the SET button, push the MENU button. When pushing the MENU button once, exits the setting menu. (7) Repeat steps (5) and (6) until changing tha all values of the requisite items. (8) To save the setting, push the SET button once on the lower control panel. (9) Push the MENU button once to exit the setting menu. (10) To exit the error logger display mode, push the MENU button once again. n When entering the error logger display mode from the maintenance mode, returns the maintenance mode screen. Exits the maintenance mode by pushing the MENU button once again.
6-78
DNW-A30/A30P DNW-30/30P
|
|
|
> |
|