Message Display
Confirmation messages or error messages will be displayed on the screen in some cases. The major messages are described below as examples. [THIS MEMORY CARD IS PROTECTED] Cancel the card lock. (P12) [NO VALID PICTURE TO PLAY] Play back after recording or after inserting a card with a recorded picture. [THIS PICTURE IS PROTECTED] After canceling the protect setting (P27), you can delete or overwrite the picture. [THIS PICTURE CANNOT BE DELETED]/ [SOME PICTURES CANNOT BE DELETED] The pictures not based on the DCF standard cannot be deleted. [NO ADDITIONAL DELETE SELECTIONS CAN BE MADE] You have exceeded the number of pictures that can be set at once with multi-delete setting. You have placed more than 999 pictures in your favorites list. [CANNOT BE SET ON THIS PICTURE]/ [CANNOT BE SET ON SOME PICTURES] If the pictures are not based on the DCF standard, the DPOF print cannot be set. [MEMORY CARD ERROR PLEASE CHECK THE CARD] Failed access to the card. Insert the card again. [READ ERROR PLEASE CHECK THE CARD] Data reading error. Insert the card again. Make sure the card is inserted properly and then play back again. [PLEASE TURN OFF THE PRINTER] Printing has finished or was canceled. Turn the printer off. (P34, 35) [PLEASE CONNECT TO THE PRINTER AND TURN ON THE PRINTER] The unit is in the print mode. Connect the printer and turn it on. (P33) [PLEASE TURN OFF THE PRINTER OR PC FOR PHOTO PLAYBACK ON TV] � If you want to print, first turn off the printer, then start the procedure again from the beginning. (P33) � The unit is connected to a PC. (P31) � For playback on a television, turn off your printer or PC to deactivate the USB connection.
