PANASONIC DMRES30VP
Manual de Usuario

Recording
Recording TV programs
� Recording procedures
Preparation �Select the unit viewing channel (e.g. AV input) on the TV. �Check that the clock is set to the correct time. If it has not been set, set it (l 46). �Press [VHS].

VHS
�The remaining tape time may not be displayed correctly depending on the tape used.

� Specifying the time when recording will stop
Preparation �Press [VHS]. While recording

[1] Insert a video cassette with an intact accidental erasure prevention tab. (l 48) [2] Press [CH, W, X] to select a TV channel.
�If you keep pressing these buttons, the channels change quickly. To select channels with the numeric buttons: Antenna Mode (Airwaves) e.g., �5�: [0] )[5] �15�: [1] )[5] CableTV Mode (Cable) e.g., �5�: [0] )[0] )[5] �15�: [0] )[1] )[5] �115�: [1] )[1] )[5]

Press [Â¥, REC] to select recording time.
�On the main unit, press [¥, REC] on the VHS side. The unit�s display Each time you press the button: Counter (Cancel) # OFF 0:30 # OFF 1:00 # OFF 1:30 ^------ OFF 4:00 ! OFF 3:00 ! OFF 2:00 !----------} For your reference �This does not work during scheduled recording. �Recording stops and the set time is cleared if you press [�, STOP].

� Watching the TV while recording
Preparation �Connection (without Audio/Video cable) - Make sure that the TV indicator is lit on the unit�s display. If it is not lit, press [VCR/TV] to light it. �Connection (with Audio/Video cable) - Press [TV/VIDEO] to change the input mode to �TV�.

[3] Press [REC MODE] to select a recording mode.
Each time you press the button: SP>EP>VP ^-----------------}

[4] Press [Â¥, REC] to start recording.
� To pause recording
Press [;, PAUSE]. (Press again to restart recording.)

Press TV�s [CH, W, X] to select a desired TV channel.
For your reference �You can also do this if the unit is making a scheduled recording. �The recording is not affected.

� To stop recording
Press [�, STOP].

Recording mode
SP: You can record the length shown on the tape. EP: 3 times the length of SP mode. VP: 5 times the length of SP mode. �To have a longer recording capacity, select �EP� or �VP�. �If the image quality is important to you or if you wish to store the tape for a long period, select �SP�. �The unit can play tapes recorded in LP mode on other equipment (�LP� lights on the unit�s display).

� Playing/Recording DVD while VHS recording
You can play or record discs while recording. The recording will not be affected. �DVD playback (l 21) �DVD recording (l 25) - When a tuner channel is being recorded on VHS, you can only record the same channel on DVD.

VP mode:
��VP� flashes on the unit�s display for 8 seconds after recording has started. �A tape recorded in VP mode by the unit cannot be played back by other VCRs. It is recommended to distinguish it from other tapes by writing �VP� on the tape label, etc. �It takes more time for automatic tracking to work when playing tapes recorded with VP mode, and it may not work at all with some tapes. Do tracking manually if this is the case (l 50). Note �Even if the video cassette you use is labeled �S-VHS�, it is not possible to record in the S-VHS system with the unit. It records in the normal VHS system. �You cannot play VP recording on other equipment. �You cannot change channels while recording. You can change channels while in pause mode. �When recording is paused for 5 or more minutes, the unit returns to stop mode.

� To display the approximate remaining tape time
[1] Select �TAPE SELECT� from the VHS MENU and select the corresponding tape length. (l 54) [2] Press [STATUS] several times. The display changes as follows each time [STATUS] is pressed. Clock ) Counter ) Remaining tape time ^--------------------------------------------------------}

51
VQT0N92

Recording Playback