Troubleshooting
1: The power does not turn on. 1-1: Are the batteries inserted? Check whether the batteries are inserted. 1-2: Is the battery power sufficient? 2: As the power is turned on, it turns off immediately. 2-1: Is the battery power insufficient to operate the camera? Replace it with new one. 2-2: Are the batteries other than the recommended ones? 3: The image cannot be recorded. 3-1: Is the Memory Card inside? 3-2: Is the mode dial correctly set? Check it. 3-3: There is no memory capacity left on the card. Before recording, delete some images. 4: The image is not displayed on the LCD monitor. 4-1: Is the LCD monitor set to OFF? 4-2: Does the economy mode work? 5: 5: 6: 6: 7: 7: The LCD monitor is too bright or dark. Adjust the brightness of the LCD monitor. Flash does not light. The flash mode is set to forced OFF. Change the flash mode. The display or images on the LCD monitor are not focused. Set the mode dial to the mode corresponding to the distance to the subject. 8: The image will not play back. 8-1: Is the Memory Card inside? 8-2: There is no image in the Memory Card. 8-3: The mode dial is not set to playback [ 9: ]. The image is not displayed on the
television. 9-1: Is the camera correctly connected with the TV? Check it. 9-2: Set the TV to video input mode. 10: When connecting to a PC, images cannot be transferred. 10-1: Check that the camera is correctly connected to the PC. 10-2: Is the camera correctly recognized by the PC? 11: The clock setting is reset. 11-1: If you do not use the camera for a long time, the clock setting may be reset. When the message [PLEASE SET THE CLOCK] appears, set the clock again. 11-2: When you take a picture before setting the clock, [0.0.0 0:00] is recorded.