When you replace the Main PCB be sure to perform the initial settings after achieving the Adjustment, by ordering the following procedure in accordance with model suffix. · Step 1. The temporary cancellation of factory setting: Set the shutter speed dial to � 8 �. While keep pressing AFL/AEL Press the � Playback Press FUNC.2 , then turn the Power on. · Step 2. The cancellation of factory setting: � button to playback mode. and � UP of Cursor key� simultaneously, then turn the Power off.
· Step 3. Turn the Power on: Set the shutter speed dial to � A �, and then turn the Power on. · Step 4. Display the INITIAL SETTING: 1. Press the Playback button, and then viewing information display. and � RIGHT of Cursor key� simultaneously, turn the Power off. 2. While keep pressing MENU/SET
· Step 5. Set the INITIAL SETTING: Select the area with pressing � UP / DOWN of Cursor key�, and then press the � RIGHT of Cursor key�.
The only set area is displayed, and then press the � RIGHT (The unit is powered off automatically.)
