[METERING MODE]
Deciding the method to measure brightness
Press [ ] to display the [REC] mode menu and select the item to set. (P82) You can record audio with the still picture if this is set to [ON]. This means you can record the conversation that took place when you were recording or an explanation of the picture. �[ ] appears on the screen when you set [AUDIO REC.] to [ON]. � Focus on the subject and press the shutter button to start recording. Recording will automatically stop about 5 seconds later. There is no need to press and hold the shutter button. � Audio is recorded from the built-in microphone on the camera. � If you press [MENU/SET] during audio recording, the audio recording is canceled. The audio is not recorded. � The total number of pictures that can be stored on each card will decrease slightly when audio is recorded with each picture. � You cannot record pictures with audio in the following cases. -When recording with Auto Bracket. -When recording in burst mode. -When the quality is set to [RAW]. -When the scene mode is set to [STARRY SKY]. � If you rotate the focus ring or zoom ring, a grinding noise may be recorded.
MENU SET
Press [
MENU SET
] to display the [REC] mode
menu and select the item to set. (P82) You can switch to the following metering modes. Multiple: This is the method in which the camera measures the most suitable exposure by judging the allocation of brightness on the whole screen automatically. Usually, we recommend using this method. Center weighted: This is the method used to focus on the subject on the center of the screen and measure the whole screen evenly. Spot: This is the method to measure the subject in the spot metering target .
