Taking Pictures
1 2,3
By only pressing the shutter button, the exposure (shutter speed and aperture value) will be automatically adjusted and the picture will be taken. [Preparation] � Insert the card. (P15) � Set the power switch to [ON]. (P17)
1 2
Set the mode dial to normal picture mode [ ]. [A Optical finder] Centre the subject in the AF target 1 inside the optical finder and press the shutter button halfway. [B LCD monitor] After centering the subject in the AF area 2 on the LCD Monitor, press the shutter button halfway. � When the focus is adjusted, the focus indication [¥] 3 appears. � When the focus indication flashes, the focus is not adjusted. Press the shutter button halfway to adjust the focus again. � The shutter speed and the aperture value 4 are automatically adjusted and displayed on the LCD Monitor. � When the subject is out of the AF area, use the AF/AE lock. (P47)
2
2048
19
3
Press the shutter button fully to take the picture. � After taking a picture, when the auto review (P71) is set to [1 SEC.]/[3 SEC.], the picture is displayed on the LCD Monitor for 1 or 3 seconds.
