No hay comentarios de productos.
SERVICE MODE
Function
KEY
Name
Details OPERATING METHOO
DEFAULT
ADJUSTMENT
remark
S10
PC ADJUSTMENT
S11 S12
OPTION Shipping
GAIN R GAIN G GAIN B OFFSET R OFFSET G OFFSET B TELETEXT OPTION DELAY -
S10 � PC MODE � PC SIGNAL ADJUSTMENT (IF EEPROM ERASE(S5) IS ON, THIS SETTING IS ERASED. DEFAULT ADJUSTMENT 10 10 10 -30 -30 -30 west-eu, east-eu, russia, greek, arabic, farci, arabich TOP&FLOP, TOP, FLOP, NON 03 (PAL=1 YC DEALY)
FIX FIX FIX FIX FIX FIX TTX language select TTX sorting mothod select FIX It is erased factory freqency table (exepting for s8,9,10,11)
5-2-2. Description of SERVICE MODE ITEM A. S1(1): Heat-Run Key => This key can check ROM VERSION. B. S2(2): I2C STOP Key => This key only use for R&D. C. S3(3): Sound/ Timer test Key => This key can check sound and decide a defect of Timer LED. D. S4(4): Tilt test Key => This key only use for adjustment of factory. E. S5(5): EEPROM Erase Key => After Mi-com update, you must erase EEPROM data using this key. F. S6(6): DECODER Key. => For the CVBS signal (Main and Sub in PIP mode) adjustment, this key adjust brightness, contrast and color. G. S7(7): PANEL TEST Key. => Using this key, you can test problem of PANEL, as confirm white pattern, red pattern, blue pattern, green pattern H. S8(8): PANEL WHITE BALANCE Adjustment Key => Using this key, you can adjust PANEL WHITE BALANCE. GAIN R,G,B: As adjust this factor, you can increase or decrease Contrast of each color. OFFSET R,G,B: As adjust this factor, you can increase or decrease Black Level of each color. I. S9(9): COMPONENT VIDEO Adjustment Key => Using this key, you can adjust WHITE BALANCE of COMPONENT VIDEO. Y, Cb, Cr DRIVE: As adjust this factors, you can increase or decrease Contrast of each color. Y, Cb, Cr OFFSET: As adjust this factor, you can increase or decrease Bright Level of each signal. J. S10(10): PC ADJUSTMENT Key. => Using this key, you can adjust WHITE BALANCE of PC. GAIN R,G,B: As adjust this factor, you can increase or decrease Contrast of each color. OFFSET R,G,B: As adjust this factor, you can increase or decrease Bright Level of each color. K. S11(LOCK): OPTION Key => Using this key, you can select TTX language, TTX sorting method. TELETEXT(language): West-EU, East-EU, Russia, Greek, Arabic, farci, arabich OPTION(sorting method): TOP&FLOP, TOP, FLOP, NON DELAY: Don�t Adjust this factor. L. S12(SLEEP): Shipping key => Using this key, you can set up at shipping mode.
-28-
